Wall leveling is a very important step that must be done before you can start laying down the tiles. Most people know that tiling a wall is not as simple as just laying tiles on the ground.

Leveling a wall before tiling is not something that is often done in the construction industry. If the wall is not leveled properly, it won’t be easy to adhere correctly to the surface.

The purpose of this article will be to provide you with all the information you need on how to level a wall before tiling. You will learn what tools and materials you’re going to need, as well as how long it should take for one person to complete this project by themselves.

What is Wall Leveling?

What Is Wall Leveling

Wall leveling is making sure that all surfaces are on an equal plane. This means that there will be no bumps, bulges, or unevenness on the wall’s surface.

If it does not level your walls before you tile them, then you may have tile edges that stick out and don’t even touch the floor. You do not want this because it will make your tiles look unprofessional and will eventually lead to them coming loose and falling off.

In order to avoid this, you need to make sure that it levels the surfaces before tiling begins. This can be a hard task if you do not have any experience in doing it.

The Importance of Leveling Walls Before Tiling

Several reasons exist why you should ensure your wall is leveled before anything else. The most important reason is that the entire look of the floor will be determined by how even it is. If your walls are uneven, then the tiles will follow in suit and have awkward gaps between them. This can lead to a lot of problems for your floor.

The other reason is that if the tiles are not level, then they will be prone to breaking and cracking much easier than usual. When you use heavy objects on them or put stress on them, they will crack because someone did not properly install it. Choosing between hiring someone for the job or doing it yourself.

Tools And Materials Needed for The Project

In order to level your walls, you are going to need a few tools and supplies. Some of the most important ones will be as follows:

  • Tape measure
  • Level
  • Spirit level or bubble level
  • Chisel
  • Hammer

Once you have these items, you can start leveling your walls.

How to Level a Wall Before You Tile It

How to Level A Wall Before You Tile It

Now that you have all the tools and materials, it is time to learn how to level your wall before tiling. The process is not as difficult as it may seem, but it will require a bit of patience and precision.

Step 1: Measure The Surface Area

The first step is to measure the surface area that you will work on. This will help you determine how much material and tools you need to complete the project.

Step 2: Mark Any Bumps or High Spots on The Wall

Once you have measured the surface, you will need to mark any bumps or high spots on the wall. This can be done with a simple level or tape measure.

Step 3: Remove Any Material That is Blocking Your View

Before you hammer away at the wall, you will need to remove any material that is blocking your view. This can be done with a chisel and a hammer.

Step 4: Hammer Away at The Marked Areas

Now that you can see the surface area with plaster properly, it is time to hammer away at the marked areas. You should use a spirit level or bubble level to ensure that it levels the surface.

Step 5: Chisel Out The Uneven Areas

Use the chisel and hammer to chip away any jagged or high areas of your wall that weren’t marked in step two. Make sure that it is even and compact before moving on to the next step.

Step 6: Apply Adhesive

After you have leveled out the surface, it is time to apply the tile adhesive. Make sure that you use a level to get it as close to straight as possible. If it is not completely level, then your tiles will be off-kilter, and it will be very noticeable.

Step 7: Screed The Surface

 Screed The Surface

Use a screed board to level the adhesive even further. If they do not do well it, then your tiles will not install correctly, and you could end up with cracks in them because of the unevenness.

Step 8: Allow Adhesive to Dry

After you have screeded, let it dry before you drywall it. This could take up to twenty-four hours, depending on what type of adhesive you used.

Step 9: Install Tiles

After the grout has dried, it is time to install your tiles. If you follow these steps correctly, then the result should be a floor that is level and even all over.

How Long It will Take to Level a Wall By Yourself

It is possible to level your wall by yourself, but it will take some time and effort. It is not a hard task, but it can be tedious if you are not used to doing it. The entire process should take around a few hours, but this may vary depending on the size of the surface area.

Hiring a Professional to Level Your Wall

If you don’t feel like taking the time and effort to level your wall by yourself, then it is a much better idea to hire a professional. This may cost a bit more, but they will get the job done quickly and efficiently. It will be well worth the money in the end if you want everything done perfectly.

Take Precautions Before Tiling a Wall

Before you tilling your wall, take some precautions. First, ensure that the floor underneath is level and even. If it isn’t, then the tiles will crack over time because of their uneven weight distribution.

Making sure your walls are solid is also a good idea. It will be much more difficult to tile them properly if they are old and falling apart. You may end up cracking or breaking the tiles if you don’t take the right precautions before you tile.

Besides this, make sure that your wall is completely clean and dry before you tilling it. Grease, dirt, and dust can all cause problems when you are tiling your wall. Before you tile a surface, the easiest way to remove moisture is with a chemical cleaner.


1. What is a Good Way to Level a Wall Before Tiling?

One of the best ways to level a wall before installing tiles is by using an adhesive and screed board. You can get these items from your local hardware store or hire them out for the job. They will do all the work for you and get it done in no time.

2. How Fast Can You Level a Wall Before Tiling?

It is possible to level the wall in one day, but it depends on the size of the surface area and how many people are working on it at once. They will most likely require around twenty-four hours or more to do their job correctly.

3. Is It Worth Hiring a Professional to Do The Job?

Is It Worth Hiring A Professional To Do The Job

Hiring a professional to level your wall before tiling is definitely worth the money. They will have the experience and knowledge to do the job quickly and with no problems. You can relax and take care of other tasks while they are working on getting your wall ready for tile installation.


Now that you know how to level a wall for tile installation, you can start your project with confidence. Make sure that you follow the steps correctly and take your time. If you are hiring a professional, then communicate what you want so they can deliver on your expectations.